Unedged Sawn Timber: Wet and Dry
Oak, ash, alder, birch, cherry, poplar, pine, spruce, larch, Douglas fir.
Cutting Dimensions
THICKNESS:
30 / 35 / 42 / 44 / 55 / 66mm
WIDTH:
120mm +
LENGTH:
2500mm +
MOISTURE CONTENT:
Available in wet or dry condition according to customer specifications.
Custom unedged oak sawn timber can be produced based on customer specifications, subject to prior agreement on quality, dimensions, cooperation, and payment terms.
Sawn Timber Quality Grades
PLUS - A Grade
- Clean on both sides.
- Healthy sapwood of 3 - 4 cm allowed.
- High-quality material intended for products requiring long elements.
STANDARD - B Grade
- Clean on one side.
- Healthy knots up to 50mm.
- 50% of the boards defect-free on the right side.
- Healthy sapwood of 3 - 4 cm allowed.
- On the left side, knots and through knots allowed at a rate of 1 piece per meter of board.
RUSTIC - C Grade
- Through knots up to 80mm, larger ones reduced.
- Sapwood fully permissible.
- Designed for short clean elements or products that highlight the rich wood grain.
Notes
- Sawn timber diameters are measured at the center of each board, with the measuring point clearly marked.
- Each board is labeled with length, width, and quality grade.
- Detailed itemized specification included with each load/package (package number, number of pieces, cubic meters, etc.).
- Full truckload shipments available.
Edged Sawn Timber: Wet and Dry<
Oak, ash, alder, birch, cherry, poplar, pine, spruce, larch, Douglas fir.
Dimensions: Example Sawn Timber 30mm
| No. | Thickness [mm] | Width [mm] | Length [mm] |
|---|---|---|---|
| 1 | 30/27 | 320/300 | 1900+ |
| 2 | 30/27 | 300/280 | 1900+ |
| 3 | 30/27 | 260/340 | 1900+ |
| 4 | 30/27 | 230/210 | 1900+ |
| 5 | 30/27 | 200/180 | 1900+ |
| 6 | 30/27 | 175/160 | 1900+ |
| 7 | 30/27 | 150/140 | 1900+ |
| 8 | 30/27 | 120/110 | 1900+ |
| 9 | 30/27 | 85/82 (frieze strip) | 1200+ |
NOTES
- Sawn timber is stacked with softwood spacers.
- Each shipment includes a detailed specification with package numbers, number of boards, dimensions, quality, etc.
Custom edged sawn timber can be produced according to customer specifications, subject to prior agreement on quality, dimensions, cooperation, and payment terms.
