Hardwood
- oak
- ash
- beech
- alder
- birch
- cherry
- poplar
- sycamore
- maple
Long Logs
Length
From 3m to 12m + 0.1m allowance
Custom lengths can be arranged according to customer requirements.
Diameter
From 30cm+, typically 35-60cm
Single pieces available from 25cm up to even 1.00m in diameter.
Quality
A, B, C, D
Possibility of sorting selected material upon request.
Measurements
Individual piece measurement
Each piece is clearly marked with a number, measured in the middle without bark, with a precisely marked measuring point.
Bark Deductions
From 3 to 5cm
30-49cm = 3cm; 50cm+ = 4cm;
Log
Length
From 2.20m to 3.10m + 0.1m allowance
Custom lengths can be arranged according to customer requirements
Diameter
From 20cm+, typically 25-50cm
Measured at the thinner end without bark
Quality
B, C, D
Sawmill log, ideal for narrower sawn timber or wooden friezes
Measurements
Measured by stacked cubic meters
Measurement in stacked cubic meters x 0.6;
Control measurement before unloading at the customer's site
Softwood
- pine
- spruce
- larch
- douglas fir
Long Logs
Length
From 3m to 12m + 0.1m allowance
Custom lengths can be arranged according to customer requirements
Diameter
Mid-diameter from 25cm+, typically 30-60cm
Measured at the thinner end without bark
Quality
A, B, C, D
Possibility of sorting selected material upon request
Measurements
Individual piece measurement
Each piece is clearly marked with a number, measured in the middle without bark, with a precisely marked measuring point
Bark Deductions
From 3 to 5cm
30-49cm = 3cm, 50cm+ = 4cm
Log
Length
3.0m / 4.0m / 5.0m / 6.0m + 0.1m allowance
Custom lengths can be arranged according to customer requirements
Diameter
From 18cm+, typically 25-50cm
Measured at the thinner end without bark
Quality
B, C, D
Sawmill log
Measurements
Measured by stacked cubic meters
Measurement in stacked cubic meters x 0.60 - 0.63, depending on the assortment;
Control measurement before unloading at the customer's site
